We manufacture snow ploughs/blades for the front or rear of farm tractors (cat 2 size pins) and also can make them for loader attachments (only made to order for loader attachments), the snow ploughs are made on site at our workshop just north of Aberdeen, although based in Scotland, haulage can quickly be organised to deliver them all over the UK and Ireland. The snow ploughs are well tested as we use them ourselves clearing snow on a contract basis for Council roads and also many private clients' car parks including large areas such as schools.

There are 3 different sizes of snow ploughs available; 2.4, 2.75 and 3m in width all blades are 0.5m high. The 2.75m model has been the most popular all rounder for roads and car parks, while the 2.4m is an excellent size for smaller, tighter car parks, and the 3m is the best at large areas such as schools and large industrial sites

There is a good return of investment on snow clearing with private clients and businesses. Price per job can add up to quite a large sum per hour.

Wheels on the snow ploughs can be added as an optional extra but are not really recommended unless doing a vast amount of mileage on roads as the rubber does last a considerably long period of time.

Snow ploughs can be viewed or even demonstrated by contacting Scott or Neil Campbell, please use the contact us page.

See two snow ploughs in action on youtube here.

Please see prices and also detailed photos below of the snow ploughs:

A hydraulic ram on each side can angle the plough either way, very useful when clearing roads and car parks getting the snow right up to the kerb allowing cars to park as normal. 1 spool valve is required for operation, if using the snow plough on the front linkage, front pipes would be required.

Reflector signs on the front and rear light up the plough during early mornings or late night work.

The tractor lift arm slides in the slotted hole when it meets bumps on the road or car parks

Wheels on the snow plough are an optional extra - they are only required if doing a huge mileage of road work. We have made our own design of large wheels, as castors are more hassle and hindrance and do not stand up to the job

50mm hard wearing rubber is fitted as standard on all models. The rubbers can be lowered and also turned round making use of the wear on both sides. Rubber also does not damage tar or lock block areas.

Strong pivot fitted with grease nipples for a long lasting life.

Each snow plough now gets professionally shot blasted and painted at chips plus Grampian

A fixed blade with no angling can be made if required

Custom paint for John Deere customer (old model shown)

Snow ploughs being constructed on site in our workshop, north of Aberdeen

Specifications

Weight of Snow ploughs Approximately 370kg
Height of Blade 0.5m
Rubber thickness 50mm
Pin size Cat2
Colour Yellow or choose your own - cost may vary

Current Prices

Scott Campbell snow plough sales 07761 194311, campbell-scott2@sky.com
Neil 07713 878663, fax 01224 790376

Used models p.o.a please call for details.
All prices are ex VAT and do not include haulage.

Extras

See two snow ploughs in action on youtube here.

Other engineering work

We also construct one off builds to suit your needs and repair digger buckets. Please contact us for more information.